It is understood that in the current furniture market, wood furniture has become a major category in the furniture category because of its novel style, bright colors and clear wood grain. Coupled with the relatively moderate price of products, consumers are increasingly favored. Experts suggest that when consumers buy wooden furniture, understanding and mastering the technical requirements of wood furniture and distinguishing their advantages and disadvantages is an effective way to correctly purchase wooden furniture. Focus on surface quality Wood-based furniture in wood furniture is based on wood-based panels such as particleboard and medium-density fiberboard. The surface is decorated with melamine, PVC, wood veneer and paper grain. The wood-like pattern is clear and natural. , smooth and flat, with good visual effects and feel. When purchasing furniture, it mainly depends on whether the surface of the furniture material has scratches, indentations, bubbling, degumming and peeling marks. Pay attention to the quality of wood furniture. In the production, the formed plates are assembled by cutting, decorative and edge-sealing parts. Look at the quality of the production of wood-based panel furniture mainly depends on the quality of the cutting saw, the quality of the edge and surface decoration and the quality of the plate port. In the cutting saw, the plate has quality requirements for the flatness, verticality and angle of the plate components. Generally speaking, the cutting technology of the plate can achieve the accuracy requirement within the range of 0.01 mm per meter. Well, after the furniture is made, there will be no tilting of the plates. The side and surface decoration mainly depends on whether the rubber coating on the decorative part is uniform, whether the bonding is firm, whether the trimming is smooth and smooth, and whether the end face of the visible part such as the side plate, the door panel and the drawer panel of the component is sealed, and the decoration is finished. Excellent marks on the edge of the sheet can not be found. Assembling the combination mainly depends on whether the hole at the drilling hole is exquisite and tidy. Whether the connecting piece is firm after installation, whether there is a gap between the plane and the end face after the T-shaped joint is connected, whether there is looseness by hand. Whether the gap between the door and the drawer is too large, the general requirement is to be between 1.5mm and 2.0mm, and whether the opening and pulling of the door and the drawer are flexible and free. Smell the wood for the sake of the vast consumption, it is impossible to recognize all the solid wood, then you should keep the following points in mind: Look at the wooden rafts with or without loops or curved pinholes (tubes) Whether the hole is regular or not, whether there is a line or curve divided into layers in the wood. If there are these lines, it can be judged to be a wood-based board (wood veneer), because the real solid wood is not except the rosewood or the flower eucalyptus. Beautiful lines. Wen Chunmu has its own special taste, even after long-term storage or finishing, there is still a smell, and there are many woods that will retain a faint taste, such as pine with turpentine taste, cedar wood has a light fragrance, cedar has a spicy taste, and the wood has The unique smell, the eucalyptus will have a very obvious camphor smell, the eucalyptus has a slight oily smell, the redwood will have a strong spicy aroma at the incision, the walnut will slightly nose, and many domestic woods have no odor, while artificial The board will have a strong chemical smell, such as formaldehyde, triterpene hydrogen ammonia, etc. will be well recognized. The tapping of the wooden piece by hand will give a crisper sound, while the artificial board will have a low sound, and the wooden piece of the box will make a loud drum sound.掂 Divided into three levels according to the weight of the wood. Lightweight dry paulownia wood, medium-weight pine, eucalyptus, autumn wood, etc., in the north of China, the medium-density wood is called soft wood (except pine), heavyweight except mahogany, Rosewood, rosewood and other hardwoods, eucalyptus, ash and birch and imported Liuanmu are called hardwoods. In summary, the wood furniture is lighter than the particleboard and medium density fiberboard furniture. Pay attention to the quality of metal parts and plastic parts. Metal parts and plastic parts are often used as fastening joints. Therefore, the quality of metal parts also determines the quality of wood furniture. Metal parts require dexterity, smoothness, and good surface plating treatment. There should be no rust, burrs, etc., and the precision of the fittings should be high. The plastic parts should be beautiful in appearance and bright in color. The parts of the force in use should have strength and elasticity, and should not be too thin. The open type connector requires flexible rotation, and the spring inside is tightly fitted, so that the furniture will be smooth, easy and free of friction when it is opened. Focus on the main size of wood furniture currently on the market mainly based on complete sets of bedroom furniture and office furniture. In addition, there are also multi-functional film and television electrical cabinets and other products. National standards for the main dimensions (ie functional dimensions) of furniture are subject to regulatory requirements. For example, the depth of the space in the hanging wardrobe should be greater than or equal to 530mm, the distance from the upper edge of the hanging coat to the upper surface of the floor should be greater than or equal to 1400mm, the height of the table furniture should be 680mm to 760mm, and the middle drawer of the writing desk. The middle clearance height from the lower edge to the ground height should be 580mm or more, and the clearance height between the bookcase layers should be greater than or equal to 230mm to 310mm. The main dimensions mentioned above mainly refer to the understanding of the furniture purchase, because if the furniture is smaller than the specified size, it will bring a lot of inconvenience when used, affecting the use of furniture. If the depth of the large wardrobe space is too small, it will affect the hanging clothes, causing the door to close. Since the beginning of this year, children's furniture has generally raised prices by 5% to 10%. Many consumers are very emotional. Does a set of children's furniture really cost 10,000 yuan to get it? With the improvement of people's living conditions, many children have their own rooms. In order to provide children with a green and comfortable space, parents' design standards for children's rooms and children's furniture purchase standards are getting higher and higher. Judging from the current investigation, most parents expressed their willingness to spend more than 5,000 yuan to buy children's furniture for their children. Talking about the reasons, parents are helpless. "It's not that we burn more money, but children's furniture is not cheap. Our own furniture can be used, but we can't grieve the children, but we must not be environmentally friendly." A lady told reporters that she had seen it in the furniture city. A set of children's furniture is basically around 5,000 yuan. "Penwood children's furniture is not less than 5,000 yuan, generally a set of seven or eight thousand. A little solid wood furniture, basically no less than 10,000." Due to factors such as raw materials, labor costs and other factors, this year's furniture The price has risen significantly, and children's furniture has not been avoided. At present, nearly 80% of the children's furniture brands on the market have already raised their prices, ranging from 5% to 10%. The bedside table of a children's brand with an original price of more than 300 yuan has now risen to more than 400 yuan. Environmental protection and design, which consumers are very concerned about, are the main factors affecting prices. The reporter learned that the reason why children's furniture is expensive is inseparable from its meticulous design. The sports car-style double-bed bed, the animal-printed wardrobe, the telescopic folding table and chairs, the bed, the designer's brains, often make the children love it, the price of furniture naturally rises. In addition, children are in the stage of growth and development. For safety reasons, the lines of children's furniture are generally smooth and smooth, with smooth switches and delicate surface treatment, and the structure is also solid, which is also the reason for its high price. Not to mention environmental protection, many parents said that they are willing to pay more for furniture for their children's health. In the market, many large brands of children's furniture have played environmental protection cards, and therefore hang on the expensive labels. Whether the furniture is environmentally friendly, the coatings used are very important, and there are only a handful of domestically produced excellent children's environmentally friendly coatings, and Berdingk waterborne wood lacquer is one of the best. For the first brand of domestic health coatings, the wood lacquer developed by Berdyk is the leader in this category. Tested by national authorities, it can decompose harmful formaldehyde, ammonia and other harmful substances, which has a positive effect on improving people's living environment quality. Tianjin Yubei Company's waterborne furniture lacquer, water-based toy lacquer, water-based handicraft lacquer and other products have passed the testing of the world's most authoritative testing institutions and reached the international advanced level.
Emergency Driver For Panel
The LED emergency driver for panel can be customized from 3W-100W with half power emergency output for emergency lighting 60-300mins. Automatic lighting up when main power failures. Suitable for LED fitting with external led driver. With internal or external lithium battery back up. Widely using for office, building, warehouse, school, hospital, workshop etc.
Emergency Led Driver,Emergency Backup Driver for led,Emergency Light Driver,Emergency Driver For Panel,led light emergency power supply
Foshan Nai An Lighting Electric Co.,ltd , https://www.naipslighting.com