1. To prevent the surface of the diamond abrasion resistant floor from being scratched: It is recommended that pedestrians wear soft-soled shoes to enter the site. Generally, the sand and other hard materials on the soles are cleaned before entering the floor area to reduce the scratching of sharp objects on the floor surface. hurt.
2. Emery wear floor in the epoxy floor to prevent the impact of heavy objects on the ground, handling items to be as gently as possible.
3. For the epoxy floor in the workshop, the speed of the vehicle should not be too fast, so as not to cause excessive shearing fever due to the braking action, so that the epoxy floor paint will instantly soften (the softening of the epoxy floor paint The temperature is about 80°C, so its use environment temperature is generally controlled below 50°C) and it produces hard-to-clean stains under the action of shear force.
4. Daily cleaning: use a neutral detergent to clean the floor or wipe with a damp rag, or use a general detergent to make the cleaning solution with a small concentration of water. Then use a floor cleaner or a cotton mop to clean it. Floor surface stains, and wash again with clean water, dry the ground; pay attention to the edge of the diamond wear-resistant floor paint do not have long time there is water.
5. Before the equipment enters the factory, it is necessary to lay a hard carton bottom on the floor so as not to scratch the ground during the transportation of the equipment;
6. If rough sand, mud, etc. on the ground should be cleaned in time, so as not to grind the ground and reduce the wear of the ground;
7. When vehicles, forklifts, etc. are running, try to avoid sudden braking. When loading and unloading, pay attention to the cargo being laid flat to avoid falling or dragging and scratching the ground.
8. The parts where leakage of oil is frequently seen must be cleaned regularly to avoid denaturation of the oil, absorption of dust, and stubborn stains.
9. Always clean and care for the floor.
PVC Moulding Angle
Pvc Moulding Angle,Angle Building Moulding,Pvc Angle,Plastic Angle Moulding
TAISHAN CITY WANAN CABLE CO.,LTD , https://www.tswanan.com