The reason why the worm gear reducer leaks oil from the oil hole

Due to the requirements of its own transmission form, the worm gear reducer needs correct refueling and oil change. Therefore, the refueling hole is a very important accessory, and it also has the function of ventilation and ventilation to balance the air pressure in the reducer. In operation, it is impossible to rule out the leakage of lubricating oil from the oil filling hole. 1. Installation method. If the worm gear reducer leaks oil from the oil hole, first check if the oil hole is reversed, under the reducer, resulting in oil leakage.
2. Unqualified installation or overhaul. When the reducer is installed or repaired, the oil hole is not completely cleaned, causing impurities to contaminate the lubricating oil and making the lubricating oil thin and leak.
3. Too much oil. The worm gear reducer has very strict requirements on the addition/replacement of oil and the amount of oil. If the amount of oil is too much, it will cause the reducer to move and exceed the oil hole through continuous stirring and vibration during the movement. Exudation. Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn

Oil Based Lubricating Grease

Petroleum Based Grease,Synthetic Waterproof Grease,Mineral Oil Based Grease,Oil Based Lubricating Grease

CHANGXING GUANGDA NEW MATERIALS CO.,LTD. , https://www.gdbentonite.com