Taibang Building Materials Co., Ltd. is a professional building material company specializing in the production and sale of corundum, sandblasted corundum, emery wear-resistant floor materials, non-fired anti-static floor materials, epoxy floor and corundum ground construction.
1. It is best to test the concrete setting time and choose the appropriate concrete mix ratio and cement admixture. If the concrete is set too fast and the corundum surface cannot be constructed, a large amount of cement slurry will accumulate when the concrete is congealed.
2. It is best to formulate a reasonable concrete donor process to ensure the continuous casting and the speed of construction with the surface layer.
3. It is advisable to choose a reasonable surface material according to the requirements and strictly control the material entry. It is forbidden to use silica sand instead of corundum to weaken the surface hardness.
4. It is advisable to choose a person who has experience in construction to carry out special level control and surface construction to ensure quality.
When we travel, we often see some stone-carved ornamental objects, such as stone portraits, stone horses, etc. Some of these things are carved with stone engraving machines, and some use diamond emery, so why should we use emery?
The ancient sculptures we usually see are generally man-made. This is not the case with modern sculptures. We often use abrasives to process them. One of the first choices for abrasives is emery. Why? Abrasives are generally based on color, hardness, and specifications. The hardness of corundum is generally between 5 and 9 calories. The hardness is very high and the color is very complete. There are black, green, and gray (cement color). And so on, its specifications we generally use this unit, it has 10, 20, 24, 36, 46 ... These are fully in line with the requirements as abrasives, and it is these that it was used for sculpture.
The sculpture uses emery, which uses its own hardness advantage to make the high-pressure air-moving emery and other abrasives impact the exterior of the stone at a high speed. After the stone surface is impacted to reach the limit of engraving, the engraver will be used. Engraving on self-adhesive paper, using self-adhesive paper as protective film for sandblasting, affixing already-engraved protective film on the outside of the stone that we want to engrave, and after some time, we will need to protect the content of the engraving. The film was peeled off, and the final engraving was done using a sandblasting gun. In this way, we can see lifelike sculptures and add a bright color to the natural environment.
When using emery, pay attention to the grinding time. Its grinding time is relatively short, but its particle shape is uniform. It is a horned crystal, with sharp edges and high grinding force, so this is the biggest reason why it is used for sculpture. one.
Organizer Eva Cases
Organizer Eva Cases,Electronic Organizer Eva Case,Hard Travel Organizer Eva Case,Eva Hard Drive Case
Dongguan C.Y. RedApple Industrial Limited , https://www.hpgbags.com